In recent years, compared with air feeders and high-speed roller feeders, servo feeders have become more and more popular. The reason is not only because of the quality of HENLI’s feeding equipment and the reliability of after-sales service, but also its servo feeder four large features: high precision, simple operation, large feeding step and low durability failure rate. These characteristics are also one of the reasons.

Mechanical Type NC Servo Roll Feeder

High precision

Using high-precision PLC controller and servo motor drive mode. After the specified feeding time is reached during the operation, the servo control system starts to run after the press sends the signal to the feeder, and the servo motor drives the lower roller through the synchronous pulley. The lower roller drives the upper roller through the gear to convey the material. This conveying method is stable and accurate.

Large feeding

The feeding step range is large and can be adjusted. The multi-stage feeding method is also one of the characteristics of the servo feeder, and the feeding step can be up to 10m. Because other ordinary punch feeders can’t meet this requirement. You can not change other molds and processes after one batch is produced. After adjusting the height and other parameters, you can continue feeding.

Simple operation

The operation is good, the operation of the servo feeder is better than air feeder and high speed roller feeder. It only needs to pass a high-definition numerical control touch screen, which is simple to realize, the setting of the feeder speed, the number of segments, the height, etc. fast and convenient. In addition to the handle, you can adjust to test machine.

Low durability failure rate

Our servo feeders are self-produced and reliable in quality. At the same time, some high-energy precision electronic, electrical and drive motors use imported original components to improve overall durability. So the failure rate is also reduced. And the servo motor has an automatic fault prompting solution function, so that the customer’s fault can be solved on time  with a reliable quality. It is very practical for customers in their production.

This is four features why servo feeder choose by more and more customers. Because it is very practical for them. It brings less troubles and save precious time .