In the process of using the 3 in 1 coil feed line for the processing and production of the coil material, the material head is often irregular, so the material head must be cut manually to avoid unnecessary damage to the mold; At the same time, when the unused material roll is rewinding for standby, it is also necessary to cut off the material tail part to avoid the irregular material tail part entering the leveling and between the feeding rollers and causing damage to the 3 in 1 coil feed line.
The cutting of the material head and the material tail is usually performed manually. However, when the material is very thick or the width of the sheet is very wide, manual cutting is time-consuming, labor-intensive, and has potential safety hazards.
For this reason, Henli specially designed and produced a material head and material tail shearing device for the 3 in 1 coil feed line, as an optional device for customers to choose. 3 in 1 coil feed line material head and material tail shearing device, also known as hydraulic shearing device, can cut the material head and material tail according to the needs when customers use the 3 in 1 coil feed line, so that the material can be cut more smoothly. Enter the mold, and in the production process, it can greatly save the time of changing the mold and repairing the mold, and the operation is simple and fast.