As industries continue to develop, the demand for more efficient and safe production processes increases. This is especially true in the manufacturing of materials where irregularities in material ends and tails can cause damage to the mold and feeding rollers. To address this issue, Henli has designed and produced a hydraulic cutting device as an optional accessory for the three-in-one decoiler straightener feeder machine.
Benefits of Using the Material End and Tail Cutting Device
Manual cutting of material ends and tails can be time-consuming, labor-intensive, and pose safety hazards, especially when dealing with thick materials or wide plate widths. With the Henli material end and tail cutting device, these issues are addressed, allowing for a more efficient and safer production process.
This device is designed to cut irregular material ends and tails to make the material feed into the mold more smoothly. By doing so, it helps to avoid scratching or damaging the leveling and feeding rollers of the three-in-one decoiler straightener feeder machine during rewinding. This saves time for changing and repairing the mold and reduces the risk of damage to the machine.
Features of the Material End and Tail Cutting Device
The material end and tail cutting device is equipped with a cylinder above and a cutter holder below the cutting mechanism. The main cutting blade is connected to the cutter holder, and an auxiliary cutting blade is also connected to the main cutting blade. The left side of the main cutting blade is equipped with a gear that is connected to the cutter holder with a rack. The right side of the main cutting blade is equipped with a buffer spring that is connected to the cutter holder with a connector. A screw is placed above the connector, and a buffer seat is placed below the buffer spring.
The device’s basic parameters include a cutting material thickness of the same as the actual machine, and no adjustment of the blade clearance is required for materials with a thickness between 1.2mm and 3.2mm. The blade action mode is hydraulic drive, and the blade clearance adjustment mode is manual adjustment, with a dial indicator showing the adjustment amount. The blade action direction is the cutter holder moving downwards to complete the cutting process. The blade material is SKD11, which has a long service life, and the four cutting edges of the blade can be replaced and reused.
Conclusion
The Henli material end and tail cutting device is an optional accessory for the three-in-one decoiler straightener feeder machine that improves efficiency and safety in production processes. It is designed to cut irregular material ends and tails to make the material feed into the mold more smoothly, reducing the risk of damage to the machine and saving time for changing and repairing the mold. With its hydraulic drive, manual adjustment, and SKD11 blade material, it is a reliable and durable addition to any manufacturing process.
评一波