1. Main function: Cut the irregular head and tail of the material, so that the material can enter the mold more smoothly when feeding. Otherwise, the 3 in 1 press feed line leveling feed roller will be scratched or damaged during rewinding;
2. Applicable material width: the same width as the actual machine applicable material;
3. Shearing material thickness: the same as the actual material thickness of the machine. There is no need to adjust the scissors gap when the material is in the thickness range of 1.2mm-3.2mm;
4. Action mode of scissors: hydraulic drive;
5. Adjustment method of scissors gap: manual adjustment, dial indicator shows adjustment amount;
6. Scissors action direction: the knife holder goes down to complete the cutting work.
7. The scissors are made of SKD11 and have a long service life (the four blades of the scissors can be replaced).