The uncoiler is a commonly used uncoiling equipment in stamping production. Usually, the loading process of the uncoiler is completed by a crane or a forklift. Since the loading of the crane or a forklift cannot be accurately centered (the center of the expanding and shrinking reel of the material rack), the actual feeding efficiency is low. Due to the poor accuracy, the operator is required to have strong professional skills, and it is also easy to damage the uncoiler and there are potential safety hazards. Especially for large wide, thick and heavy materials, these problems are particularly prominent, and feeding is very inconvenient.
In order to fundamentally solve the troublesome problem of coil loading of uncoilers, henli has a hydraulic feeding trolley for customers to choose. It can automatically receive materials, automatically convey, automatically center the spindle, and automatically reset. It has high feeding accuracy, fast speed, and good stability, and can realize fully automated feeding operations. Using the feeding trolley can greatly reduce labor costs and greatly increase the effective stamping working time.
Henli’s hydraulic feeding trolley consists of a V-shaped platform, a lifting motor, a linear guide rail, a chain guide rail, a travel drive motor, a stopper, and an operation control handle. Among them, the V-shaped platform is in the form of roller shaft bearing, the lifting motor is hydraulic, and the pressure-holding valve can control the load to run smoothly. The travel drive motor is a hydraulic motor, and the speed can be adjusted through the throttle valve. The travel switch and the stopper can effectively prevent the trolley from going offside.
The uncoiler equipped with a hydraulic feeding trolley only needs to put the coil on the V-shaped platform in actual use. After the material roll is placed, the feeding trolley will automatically center itself according to the width of the material roll, automatically lift and move laterally, and transfer the material roll to the main shaft of the material rack smoothly and accurately, realizing precise positioning and loading. At the same time, the trolley is equipped with auxiliary feeding rollers and roll anti-dumping baffles, which can effectively prevent the roll from dumping when transferring materials with a small width. The uncoiler equipped with a loading trolley can greatly improve work efficiency and stamping efficiency in actual stamping operations.
If you want to know more about the uncoiler, you can read the following articles, which can help you solve all the confusion about the uncoiler and help you fully understand the uncoiler.
Uncoiler Machine – All questions about uncoilers/decoilers are here