In the world of electric motors, the conical rotor motor is a unique and powerful workhorse. Unlike a standard motor, it has a clever, built-in braking system. When you power it on, the rotor’s conical shape causes it to move forward from the magnetic pull, which simultaneously disengages a brake. The moment you cut the power, it stops instantly. This feature makes it essential for high-precision equipment like hoists, cranes, and automated assembly lines where immediate stopping is a critical safety and operational feature.

But this brilliant design hides an incredible manufacturing challenge. As the name suggests, both the internal rotor and the outer stator are cone-shaped. This means that every single lamination—the thin silicon steel plates stacked to create the motor’s core—is a slightly different size.

The Old, Inefficient Manufacturing “Nightmare”

Traditionally, producing these laminations was a slow, multi-step, “single-piece” process that was impossible to mass-produce.

  1. A large press would blank the main outer and inner circles from a steel strip.
  2. The pieces were then fed into three separate single-slot notching machines to slowly punch the slots, one tooth at a time, using a clunky mechanical indexing system.

This process was plagued with problems. It was slow, required complex adjustments, and produced terrible quality. The parts had inconsistent slot widths, poor concentricity (they weren’t perfectly centered), and high burrs (sharp, raised edges over 0.05mm).

When these messy, uneven laminations were stacked, the results were disastrous for the motor’s performance:

  • Massive energy loss from excitation currents and eddy currents.
  • Increased noise and poor heat dissipation.
  • A significant reduction in the motor’s overall power and efficiency.

The High-Speed, High-Precision Solution

To solve this, a modern, high-efficiency automated stamping line was designed. This solution achieves what the old method could not: one-time forming, high precision, and mass production. This line consists of:

  • A Dual-Head Decoiler for a continuous, non-stop supply of silicon steel.
  • An S-Loop Straightener to ensure the material is perfectly flat before stamping.
  • A High-Speed Press equipped with a complex Progressive Die.
  • The “brain” of the entire operation: a multi-stage NC Servo Feeder.

The “Secret Sauce”: The NC Servo Feeder’s Multi-Stage Program

The true genius of this line is the “multi-stage feeding” program of the NC Servo Feeder. The single progressive die contains all the stations needed to cut every part (rotor slots, rotor blank, stator slots, stator blank).

The NC Servo Feeder is programmed to feed different, precise lengths of material in a specific sequence. By feeding slightly different lengths into different stages of the same die, the system can, in one continuous, high-speed operation, punch out the entire family of differently-sized laminations required to build the perfect cone.

The Result: From “Impossible” to Mass Production

This automated solution completely transforms the manufacturing process. The finished laminations are now of exceptionally high quality:

  • Excellent Consistency: Every lamination is a perfect, precise copy.
  • Superior Quality: Burrs are reduced to less than 0.02mm.
  • Perfect Stacks: The pieces are flat with almost no “fanning,” allowing for a perfectly tight and aligned core.

For the final motor, this means a massive reduction in energy loss, lower noise, and a significant boost in power and efficiency. Thanks to the NC Servo Feeder and this modern line, a complex, high-cost component can finally be mass-produced with the quality and precision it always required.

NC Servo Feeder
NC Servo Feeder