Stamping processing is a common method used to produce metal parts in various industries. In this process, a punch press servo feeder plays an important role in feeding materials into the stamping machine, ensuring efficient and accurate production. However, due to the different characteristics of materials, the use of punch press servo feeders in stamping processing may raise some questions. This article aims to answer some common questions regarding the use of punch press servo feeders in stamping processing and provide some solutions to optimize the process.
Question 1: Can Punch Press Servo Feeder be used for Stamping Processing of Thin Material?
Yes, punch press servo feeders can be used for stamping processing of thin materials. To ensure that the thin material is fed correctly into the stamping machine, it is recommended to install a guide device on the punch press servo feeder, which can effectively prevent the material from bending or deforming during the feeding process.
Question 2: Can Press Punch Servo Feeder be used for Stamping Processing of Hard Material?
Yes, press punch servo feeders can also be used for stamping processing of hard materials. To avoid damaging the hard material during the feeding process, it is recommended to install a protective device on the press punch servo feeder, such as a PU sleeve on the feeding roller. This method is often used and is very effective in protecting the material from being scratched.
Question 3: Will the Coated Material be Scratched During Feeding with Press Punch Servo Feeder?
Coated materials such as aluminum and magnesium can easily be scratched during feeding with a press punch servo feeder. To avoid this, PU treatment can be applied to the feeding roller of the press punch servo feeder. This method is frequently used and is very effective in protecting coated materials from being scratched.
Question 4: Can Punch Press Servo Feeder be used for Stamping Processing of Soft Material?
Soft materials can be processed by installing the punch press servo feeder at the outlet of the stamping machine and adopting a feeding method that uses pulling.
Question 5: What Should be Noted When Using a Large Tonnage Stamping Machine with Small Molds?
When using a large tonnage stamping machine with small molds, it is necessary to install a guide device between the punch press servo feeder and the mold to ensure the correct feeding of the material (in both vertical and horizontal directions) and to prevent the material from bending or deforming before entering the mold.
Question 6: How to Solve the Quick Temperature Rise of the Mold in Stretching Stamping Processing?
To solve the quick temperature rise of the mold in stretching stamping processing, a double-sided oiling machine can be installed at the outlet of the punch press servo feeder. This will effectively lubricate the material entering the mold, which is very effective in reducing the temperature of the mold and improving the life of the mold. It is important to note that the lubricating oil must not flow back into the roller of the punch press servo feeder, as this may cause slipping during the feeding process.
In conclusion, the use of punch press servo feeders in stamping processing is a reliable and effective solution, especially for processing different types of materials. By paying attention to some key points and taking the appropriate measures, the quality and efficiency of the stamping process can be significantly improved.