As the stamping industry advances toward high precision and integration, traditional manual methods are rapidly being replaced by automated production lines. At the heart of these lines, feeding equipment is critical. Roller feeders remain common and suit fixed-pitch, high-volume work: they are driven by the press output shaft and need no electricity or compressed air. Their feed length, however, is set mechanically, so lines that change step distance often or run many part sizes need a feeder that can be reprogrammed.
Enter the NC Servo Feeder, a breakthrough solution for automated stamping lines. Engineered with servo-driven technology, it overcomes traditional shortcomings and excels in high-precision applications like refrigerator compressor housing stamping.
Why NC Servo Feeders Excel in Compressor Housing Production
-
Unmatched Precision
Replacing mechanical linkages with a servo motor + PLC control ensures ±0.02mm accuracy—essential for leak-proof compressor housings. -
Simplified Operation
Touchscreen programming allows instant step adjustments (0–10m), eliminating manual calibration for varied housing designs. -
Zero-Slip Reliability
Eccentric roller bearings self-lock during intervals, preventing material drift and eliminating cumulative error. -
High-Speed Synchronization
Direct servo-to-roller drive via timing belts maintains sync with presses at 150+ SPM.
Integration in Appliance Stamping Lines
For compressor housing production:
-
Mount the feeder to the press side plate; align to material height.
-
Connect air supply (0.4–0.6 MPa) and signal cables (release/send from press cam).
-
The PLC automates feeding/relaxing cycles, enabling uninterrupted, high-volume stamping.
