Coil decoilers
Coil decoilers from 100 kg to 20 tons
Choose by coil weight, strip size and how the coil is loaded. Each card opens the full product page with specifications, videos and quotation details.
- 9 machines
- 100 kg – 20 t coil weight
- 5 – 1,800 mm strip width
-
Start here
Standard feeding
Motorized Coil Decoiler
MT-200 to MT-800
- Coil weight
- 200 kg – 5 t
- Reinforced
- up to 8 t
- Coil width
- 200 – 800 mm
Stamping presses, feeders and cut-to-length lines
View product -
Standard feeding
Manual Decoiler / Stock Reel
Light duty, non-powered
- Coil width
- 200 – 400 mm
- Drive
- pulled by feeder
Light coils and simple, low-speed feeding
View product -
Heavy coils
Hydraulic Decoiler
Heavy duty
- Coil weight
- 5 – 15 t
- Coil width
- up to 1,600 mm
- Custom
- 20 t, 1,800 mm
Heavy steel coils with hydraulic mandrel expansion
View product -
Heavy coils
Hydraulic Coil Loading Car
For decoilers and uncoilers
- Coil weight
- 3 – 20 t
- Coil width
- 100 – 2,000 mm
Safer, faster coil loading on new lines or retrofits
View product -
Heavy coils
Double Head Decoiler
Two mandrels, MTD series
- Per mandrel
- 500 kg – 5 t
- Strip width
- up to 600 mm
- Thickness
- 0 – 3.0 mm
Load the next coil while the line keeps running
View product -
Thin & light strip
Horizontal Decoiler
Flat pallet / disc
- Thickness
- 0 – 1.2 mm
- Strip width
- 5 – 120 mm
- Coil weight
- 500 – 2,000 kg
Thin, narrow strip that must lie flat
View product -
Thin & light strip
Light Duty Decoiler
CR-100 / CR-200
- Coil weight
- up to 100 kg
- Strip width
- up to 180 mm
Small coils in compact press rooms
View product -
Wire & rewinding
Wire Pay-off Decoiler
Horizontal, automatic
- Wire coil
- 100 – 1,000 kg
CNC spring and wire bending machines
View product -
Wire & rewinding
Metal Strip Recoiler
MT series
- Coil weight
- 500 – 3,000 kg+
- Strip width
- 200 – 800 mm
Rewinding strip or scrap after processing
View product
Types of coil decoilers
Each type solves a different coil handling problem. Open its product page for full specifications.
Motorized coil decoiler
A motor drives the mandrel and an induction loop starts and stops pay-off, so the coil unwinds at the speed the straightener or feeder pulls. MT-200 to MT-800 models cover 200 – 800 mm coil widths and 200 kg to 5 t coils, reinforced up to 8 t.
Manual decoiler / stock reel
A non-powered reel: the feeder or straightener pulls the strip and turns the coil. It suits light coils 200 – 400 mm wide and simple lines where the strip is strong enough to be pulled.
Hydraulic decoiler
A heavier frame with hydraulic mandrel expansion for steel coils of 5 – 15 t in standard models, custom-built up to 20 t and 1,800 mm wide. It is often paired with a coil loading car.
Double head decoiler
Two spindles on a turret: the next coil is loaded on the idle spindle while the active one feeds, then the turret rotates 180° to switch. MTD models carry 500 kg to 5 t per side on strip up to 600 mm wide.
Horizontal decoiler
The coil lies flat on a rotating pallet instead of hanging on a mandrel, so thin, narrow or soft strip (0 – 1.2 mm, 5 – 120 mm wide) does not deform or tangle. Inverter control and auto-tracking follow the line speed.
Light duty decoiler
A compact motorized stock reel for coils up to 100 kg and strip up to 180 mm wide. The CR series can also rewind continuous strip at the end of a line.
Wire pay-off decoiler
A horizontal rotary pay-off for wire coils of 100 – 1,000 kg that feeds CNC spring and wire bending machines.
Hydraulic coil loading car
Not a decoiler itself: a hydraulic car that lifts and centers 3 – 20 t coils onto the mandrel. It fits new lines or can be retrofitted to an existing decoiler.
Metal strip recoiler
Works at the other end of the line: MT-series recoilers rewind processed strip or scrap into coils of 500 – 3,000 kg+ and 200 – 800 mm wide.
Which decoiler fits your coil weight?
Coil weight on a log scale. The lighter end of a bar is a reinforced or custom build.
View as table
| Machine | Standard coil weight | Reinforced / custom up to |
|---|---|---|
| Light duty decoiler | up to 100 kg | – |
| Wire pay-off decoiler | 100 kg – 1 t | – |
| Motorized decoiler (MT) | 200 kg – 5 t | 8 t |
| Horizontal decoiler | 500 kg – 2 t | – |
| Double head decoiler | 500 kg – 5 t | 10 t |
| Coil loading car | 3 t – 20 t | – |
| Hydraulic decoiler | 5 t – 15 t | 20 t |
How to choose a coil decoiler
The same search for a decoiler can end in very different machines. These four details usually decide the type.
Coil weight and dimensions
Coil weight, width, inner and outer diameter set the frame strength and mandrel design, and decide whether manual loading is realistic.
Material and strip behavior
Material grade, thickness, surface condition and coil set affect brake control, loop stability and the straightening that follows.
Loading method
Small coils can be loaded by hand. Heavy coils usually need hydraulic expansion, a coil car, a pressing arm or extra support.
Downstream process
A stamping press, straightener feeder, slitting line, roll forming line or rewinder each needs a different decoiling speed and loop control.
Match the decoiler type to your production problem
Use this when you know the problem on the line but not yet the machine.
| Your situation | Recommended type | Why it fits |
|---|---|---|
| Standard strip feeding for a stamping press, feeder or straightener | Motorized decoiler | The common route for 200 kg – 5 t coil feeding; a manual stock reel covers the lightest jobs. |
| Small coils, thin strip and a compact press room | Light duty decoiler | Easier to place and run when coil weight and strip size are modest. |
| Heavy steel coils or strict loading safety | Hydraulic decoiler | Hydraulic expansion and a stronger frame for heavy-duty coil weights. |
| Coils that are hard to lift, center or align by hand | Coil loading car | The car lifts and aligns the coil on the mandrel before unwinding starts. |
| The line stops for every coil change | Double head decoiler | One side is loaded while the other feeds, cutting changeover downtime. |
| Thin, narrow or soft strip that must lie flat | Horizontal decoiler | Flat pallet support keeps light strip from deforming or tangling. |
| Wire coils for spring or bending machines | Wire pay-off decoiler | A rotary horizontal pay-off built for wire coils. |
Where the decoiler sits in a press feeding line
The decoiler is the first station of the line. Its speed, loop control and height have to match the machines that follow.
-
Coil loading
A crane or a coil loading car puts the coil on the mandrel.
-
Decoiler
Holds the coil and pays off strip on demand from the loop.
-
Straightener
Removes coil set before feeding; see coil levelers.
-
Servo feeder
Feeds exact lengths into the die; see coil feeders.
-
Press
Stamps the part while the loop keeps the decoiler and feeder in step.
Animation of an MT-500 with optional coil car, hydraulic expansion, VFD speed control and pressing arm.
Decoiler straightener and feeder combinations
Short on floor space? Combine the decoiler with a straightener, or with a straightener and NC servo feeder, in one frame.
Recent decoiler projects
Standard MT decoilers adapted with hydraulic expansion, VFD speed control, pressing arms and loading cars to real coil data.
-
USA
Non-standard decoiler for 800 mm (31.5 in) wide coils and 8 – 12 mm material.
-
Germany
MT-500, 2 t, 500 mm width, with pressing arm, VFD speed control and coil layer control.
-
Spain
MT-500, 2 t, with hydraulic expansion and VFD speed control.
-
Mexico
MT-1300, 5 t, with hydraulic expansion, pressing arm, support device, VFD control and loading car.
-
Italy
Decoiler supplying strip to a cut-to-length line.
-
Finland
Custom non-standard decoiler built for a special coil size and line layout.
Coil decoiler FAQ
What is a decoiler machine used for?
A decoiler holds a coil and unwinds strip, sheet or wire into the next machine, such as a straightener, feeder, stamping press, roll forming line or rewinder.
What is the difference between a decoiler and an uncoiler?
In practice there is none. Decoiler, uncoiler, coil reel and pay-off reel all describe a machine that holds a coil and unwinds strip into the next process.
When should I choose a motorized decoiler?
Choose motorized decoiling when the coil needs controlled unwinding, smoother loop feeding or better matching with a downstream automatic line.
When is a hydraulic decoiler better?
Hydraulic decoilers fit heavier coils and applications where mandrel expansion, coil support and safer loading matter more than a simple stock reel.
Do I need a coil car?
A coil car is worth considering when coils are heavy, hard to center by hand, or when safer loading and alignment are important for operators.
How heavy a coil can a decoiler handle?
From up to 100 kg on the CR light duty decoiler to 20 t on custom hydraulic decoilers. The MT series covers 200 kg to 5 t, reinforced up to 8 t.
What information decides the decoiler size?
Coil weight, coil width, material thickness, inner diameter, outer diameter, line speed and the downstream equipment decide the practical decoiler configuration.
Can a decoiler be added to an existing press line?
Yes. Send the model of your press, feeder or straightener, the feed direction and the floor space, and the decoiler is sized to fit. Coil loading cars can also be retrofitted.
Can HENLI quote a complete feeding line?
Yes. Send the coil data, press or processing line information and floor layout, and HENLI can suggest the decoiler, straightener, feeder and controls together.
Send your coil data, get a matched decoiler
Include these details and we reply with a matched configuration and factory-direct pricing.
- Coil: weight, width, inner and outer diameter, material grade and thickness
- Line: floor space, loading direction, existing straightener, feeder or press
- Production: line speed, changeover frequency, loop control needs
- Scope: new line, replacement decoiler, heavy-coil or safety upgrade
































































