Our core success lies in customizing equipment to align with our customers’ unique production needs. Recently, we received an inquiry about pairing our standard roller feeder RFS-3020 with the heavy-duty decoiler MT-300 to create a stamping production line for materials with specific dimensions: 4.0mm thickness, 300mm width, and a feeding pitch of 180mm. To meet these requirements, standard decoilers and feeders are insufficient. Here are our proposed modifications to the RFS-3020 and MT-300:
Enhancements to the RFS-3020 Roller Feeder
Switch to Pneumatic Release: To streamline the adjustment process, we propose replacing the mechanical release rod with a pneumatic release. This adjustment will integrate with the press machine, facilitating a more efficient release.
Hydraulic Press Head Installation: Installing a hydraulic press head device before the RFS-3020 will address the material head feeding issue. This modification ensures the smooth entry of the material head into the press feeder.
Upgrades to the MT-300 Decoiler
Non-Powered Pressure Arm Installation: Given the thick nature of the material and its strong recoil force, adding a non-powered pressure arm to the MT-300 will prevent material recoil, thereby enhancing safety.
Potential Challenges and Recommendations
While these modifications are essential, they come with certain drawbacks and areas for further improvement:
Material Thickness Limitation: The RFS-3020 roller feeder, after modification, can only handle material thicknesses between 0.8mm and 4.5mm. It is unsuitable for materials thinner than 0.8mm.
Rear Tension Issues: The strong rear tension from the thick material can damage the reverse device of the press feeder.
Feeding Accuracy Concerns: High degrees of material bending can cause feeding issues. Without proper straightening, this can result in inaccurate feeding through the press feeder and into the die.
Suggested Solutions for Improved Performance
Thick Plate Leveling Machine: To ensure the material is straightened for precise feeding, we recommend adding a thick plate leveling machine between the press feeder and decoiler. The line then becomes a decoiler and straightener combined with roller feeder, the layout covered in our operating guide.
NC Servo Feeder Replacement: To achieve a multi-purpose machine and minimize malfunctions, consider replacing the roller feeder with a thick plate NC servo feeder. This upgrade can significantly enhance the versatility and reliability of the stamping production line.
By implementing these enhancements and recommendations, we can better meet our customer’s production needs, ensuring the reliability and efficiency of their stamping production line.
Other Decoiler and Roller Feeder Line Layouts
This 4.0 mm case needs a heavy-duty decoiler and a thick plate straightener. Thinner strip is usually fed through one of these layouts:
Horizontal Decoiler and Roller Feeder: For ultra-thin, narrow or delicate strip, such as terminals and micro-connectors, a horizontal flat decoiler pays off the coil, a precision straightener removes coil set and the high-speed roller feeder indexes the strip into the press.
CR Light-Duty Reel: For small, light coils up to 100 kg (220.5 lb), a CR light-duty reel pays off the strip into a free loop ahead of the roller feeder. When the loop rises to the upper sensor rod, the reel starts paying off; when it falls to the lower rod, the reel stops.
HENLI builds these machines at its factory in Dongguan, China. Model ranges for each China high speed roller feeder and the three standard line configurations are listed on the RFS product page.



























































