[layerslider id="9"]
NEWS2019-10-07T14:29:06+08:00

Introduction to the performance characteristics of the 3 in 1 uncoiler straightener feeder.

By |December 8th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

3 in 1 uncoiler straightener feeder features: 1. It integrates the three functions of servo feeder, coil straightener and uncoiler, which reduces the error during feeding and leveling and [...]

Detailed introduction of the stop arm of the uncoiler.

By |December 8th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

When the uncoiler is in use, a special material stop device must be used to limit the material coil. Its purpose has two points: one is to make the [...]

Installation points of 3 in 1 decoiler straightener feeder.

By |December 7th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

The 3 in 1 decoiler straightener feeder is mainly composed of uncoiler, straightening machine and NC servo feeder. It has been debugged before shipment, and all connection lines and [...]

Maintenance of hydraulic system of 3 in 1 uncoiler straightener feeder

By |December 7th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

1. Fuel tank maintenance. 1. 1. Confirm the oil level gauge to keep the oil level within the upper and lower limits. 1.2. Use an oil thermometer to [...]

The function of the feeding trolley on the uncoiler.

By |December 6th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

The uncoiler is a commonly used uncoiling equipment in stamping production. Usually, the loading process of the uncoiler is completed by a crane or a forklift. Since the loading [...]

Precautions for overhaul and maintenance of decoiler straightener feeder

By |December 5th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

1. Before starting to overhaul and maintain the decoiler straightener feeder, read the operation manual carefully. a. Before starting the inspection and maintenance work, read the operation manual carefully [...]

Adjustment of the leveling roller of the uncoiler straightener feeder

By |December 4th, 2022|Company News, Metal Coil Feeding, News, Recommend News|

In the actual stamping automation production process, because the thickness, width, material, bending degree, etc. of the materials used are different, it is necessary to adjust the leveling amount [...]

Improvement of brake structure of non-powered uncoiler

By |December 3rd, 2022|Company News, Metal Coil Feeding, News, Recommend News|

According to the different operating principles of the uncoiler, the uncoiler is divided into two types: a powered uncoiler and a non-powered uncoiler. In fact, in stamping, what is [...]

Special attention when operating the decoiler straightener feeder.

By |December 3rd, 2022|Company News, Metal Coil Feeding, News, Recommend News|

1. Non-operating personnel are not allowed to operate. 2. When operating the decoiler straightener feeder, wear gloves on your hands. a. Except for operating the operation panel, gloves [...]

Precautions for uncoiler straightener feeder before stamping production.

By |December 3rd, 2022|Company News, Metal Coil Feeding, News, Recommend News|

1. To formulate a detailed stamping production plan. a. Make a production plan so that all relevant operators fully understand the meaning of all signals, signs and symbols. b. [...]

How The Decoiler Straightener Feeder Loads Coils

By |December 1st, 2022|Company News, Metal Coil Feeding, News, Recommend News|

The coils carried by the decoiler straightener feeder are heavy (usually more than 3 tons), so special attention should be paid to loading the coils. The coils can be [...]

Go to Top