Engineering guide for simple multi-hole hardware

Bottom line: A practical mending plate stamping line does not automatically require a high-end integrated feeding system. For many flat, multi-hole repair plates, a decoiler, straightener and suitable feeder can prepare coil strip and deliver a repeatable pitch to the press. The correct arrangement still depends on the material specification, strip layout, coil data, die design, press interface and production target. Confirm whether punching and profile separation occur in a progressive die, compound die or separate operations before selecting the front-end equipment.

A flat mending plate looks simple, but its repeated holes make strip positioning visible in the finished part. If the feeder slips, the strip tracks sideways or the die pilots and feeder release are not coordinated, the first holes may appear acceptable while later holes or the final cut position drift.

The objective is therefore not maximum automation. It is a stable path from coil payoff to die entry, with enough straightening, buffering and feed control for the real part drawing. Material thickness, width, strength, coil dimensions, speed and tolerances remain project inputs and must not be assumed from the product name.

Start with the partUse the drawing and strip layout to define holes, profile separation, pitch and any secondary work.
Control the pitchCheck the first-to-last hole relationship, strip grip, pilot release, guides and press timing together.
Keep the line practicalEvaluate separate equipment first; add integration only when the material, plant or changeover need justifies it.

What Is a Mending Plate?

A mending plate is a flat metal connector used to reinforce or repair a joint. Typical products, also sold as mending braces, have a rectangular or strip-shaped outline and several repeated holes for screws or other fasteners. They are common in furniture repair, wood joining, door repair and general hardware applications.

The term should not be used interchangeably with an angle bracket, truss connector plate, nail plate or large structural gusset. Those products can have different geometry, loading requirements and manufacturing processes. The part drawing remains the authority for material, hole pattern, profile and any secondary operations.

How Does a Mending Plate Stamping Line Work?

Coil → decoiling → straightening → feeding → hole punching → profile blanking or cut-off → part collection

Coil uncoiling

The decoiler supports the coil and releases strip as downstream equipment requests material. Its capacity and control method must match the coil weight, inner and outer diameters, strip width and material behavior. Stable payoff matters because excessive drag or uncontrolled overrun can disturb the buffer and affect downstream feeding.

Separate decoiler and coil straightener suitable for a mending plate stamping line
Separate decoiling and straightening stations can provide a clear, economical material path for simple hardware.

Strip straightening

A flat finished part can still begin with curved strip. Straightening reduces coil set and residual bend before the material reaches the feeder and die. The suitable straightener depends on thickness, width, strength, required flatness and surface-protection needs; “thin strip” alone is not enough for selection.

Multi-roll coil straightener for preparing thin steel strip
Roller settings must suit the actual strip rather than a generic hardware category.

Feeding and hole punching

The feeder advances the strip by the programmed or mechanically fixed pitch. The press and die then punch the required hole pattern. If the die uses pilots, feeder release and pilot timing must be coordinated so the strip can locate without being held incorrectly.

Open metal stamping die with repeated punching positions in a metal strip
Die layout determines whether holes and the outside profile are formed together or in separate stages.

Blanking and cut-off

The outside profile may be blanked within a progressive or compound die, or the strip may be cut off after punching. Part discharge, scrap handling and any extra forming must be confirmed from the die concept. Chamfering, countersinking, tapping, bending and surface treatment are not inherent steps in every mending plate process.

Why Feed Pitch Matters in Multi-Hole Hardware

Feed pitch connects strip movement to the repeated hole pattern. A deviation on one feed may affect only one feature; repeated deviations can shift later holes or the final cut position. Check the first-to-last hole relationship, not only one adjacent spacing.

Possible causes include feeder slip, incorrect feed settings, strip tension, side drift, poor guide alignment, mistimed pilot release or a die-location problem. The decoiler and straightener should supply material without pulling against the feeder, side guides should control entry, and the press signal should trigger each feed at the correct point in the cycle. Final capability must be verified with the actual strip, press and die.

Coil feeding equipment supplying strip to a stamping press
The buffer, pass line and press-entry interface influence feed consistency.

Compare Three Practical Feeding Configurations

Configuration When to evaluate it Main check
Decoiler + straightener + NC servo feeder A flexible, economical starting point when separate selection and straightforward service are priorities. Floor space, buffer control and signal coordination.
2-in-1 decoiler straightener + NC servo feeder Projects seeking fewer separate machines and a more compact upstream arrangement. Material range, loading access and the path to the feeder.
Air feeder or roller feeder Narrow strip, simple fixed-pitch work or budget-sensitive production where the method fits the die. Pitch, speed, material, release requirement and acceptable capability.

An NC servo feeder is often useful when recipes change or feed lengths must be programmed, but it is not automatically necessary for every part. Likewise, a 3-in-1 feed line is not the default choice for simple flat mending plates. Evaluate one only when coil weight, material thickness, floor space, changeover or automation requirements justify the added integration.

Compact decoiler straightener feeder positioned beside a stamping press
A compact arrangement can reduce separate stations, but suitability still depends on the operating range and press interface.

Prepare the Selection and RFQ Inputs

Provide one complete input sheet rather than selecting equipment from a machine name alone.

Material and coil

  • Material grade, strip thickness and width
  • Coil inner diameter and outer diameter
  • Maximum and normal coil weights
  • Surface-protection requirement

Part and strip layout

  • Part drawing and outside dimensions
  • Hole quantity, diameter and spacing
  • Feed pitch and proposed strip layout
  • Required flatness and cut-off concept

Press and die

  • Press model and specifications
  • Die type, height and feeding level
  • Feeding direction and available feed window
  • Pilots and feeder-release requirement

Production and plant

  • Required production rate
  • Available line length and width
  • Coil-loading and operator access
  • Required control and stop signals

Missing values should remain open for engineering review. Material range, feeding capability and final line layout must be confirmed from compatible operating combinations—not isolated maximum figures.

Separate Equipment, Die and Material Problems

Symptom Possible source What to check
Inconsistent hole spacing Equipment/control Feed setting, roller grip, strip tension, press signal and pilot release.
Strip tracks sideways Equipment or material Coil centering, machine centerlines, side guides, strip camber and edge condition.
Part is not flat Material, straightening or die Incoming coil set, roller adjustment, residual stress and blanking distortion.
Surface marks Equipment or handling Roller cleanliness, pressure, guide contact and material protection.
Punching burrs Die/process Punch and die condition, clearance, alignment and material condition.
Intermittent misfeeds Interface Feed-complete signal, press timing, sensor state, die pilots and restart sequence.

Do not assign every defect to the feeder. First classify whether the mechanism comes from material, decoiling/straightening, feeding, die condition or press-control timing; then test one cause at a time.

Confirm HENLI’s Supply Scope

HENLI can supply the coil-handling front end: decoilers, straighteners, NC servo feeders, air feeders and other suitable feeding equipment. HENLI can also support the interface between this equipment and the customer’s press, die and control signals.

The stamping press, stamping die, part-collection equipment, plating, coating, heat treatment, packaging and assembly are supplied by the customer or relevant third parties unless separately confirmed. HENLI does not present this application as an unverified turnkey line. The final configuration depends on the part drawing, coil specification, press and die interface, production target and plant layout.

Frequently Asked Questions

Can mending plates be produced with a progressive die?

Yes, if the part geometry, strip layout and required output support progressive processing. Whether punching and profile separation share one die, and how the part exits, must be confirmed by the tooling supplier.

Is an NC servo feeder necessary for repeated hole patterns?

Not always. It is useful when programmable feed lengths, recipe changes or control integration are required. A fixed-pitch feeder may also be practical when its capability matches the material, die and production conditions.

Can an air feeder be used for low-cost mending plate production?

It can be evaluated for simple, budget-sensitive fixed-pitch work. Confirm strip dimensions, feed pitch, required rate, release method and the acceptable result through a representative production trial.

Does thin steel strip always need straightening?

Do not decide from thickness alone. Incoming coil set, width, strength, part-flatness requirement and the die process determine whether straightening is needed and what roller arrangement is suitable.

What information should be provided when requesting a feed-line quotation?

Send the part drawing, material grade and dimensions, coil ID/OD/weight, strip layout, feed pitch, press specifications, feeding level, die information, target rate and available floor plan.

Plan the Front End Around the Part and Die

A cost-effective mending plate stamping line begins with a verified process, not the most integrated machine. Define how the holes and profile are produced, stabilize the strip before it reaches the die, and choose a feeder that matches the required pitch and press timing. Then validate the complete press–die–material–feed interface with representative coil.

Send HENLI your mending plate drawing, material thickness, strip width, coil weight, feed pitch, press specifications and production target. Our team can evaluate a practical decoiling, straightening and feeding configuration for your stamping application.

Need a Practical Mending Plate Feed-Line Review?

Share the part drawing, coil specification, feed pitch, press data and production target. HENLI can review the decoiling, straightening, feeding and control-interface scope.

Request a Line Review