Maximizing Efficiency: The Advanced Features of the 3-in-1 Decoiler Straightener Feeder

In the realm of metal processing machinery, the 3-in-1 decoiler straightener feeder for medium and thick plates stands out with its innovative design, providing enhanced installation simplicity and operational efficiency. Distinguishing itself from conventional decoilers, this cutting-edge machine employs a stopper arm instead of the traditional A-type iron stopper. Let’s delve into the operational nuances of this technology.

Stopper Arm Flexibility

The stopper arm in the 3-in-1 decoiler straightener feeder boasts a unique bifacial design, enabling independent adjustments on its front and rear sides. The front stopper arm combines vertical oscillation with forward-backward movement, while the rear stopper arm is dedicated solely to forward-backward adjustments.

Front Stopper Arm Adjustments

Forward-Backward Movement Adjustment

To fine-tune the forward-backward movement of the front stopper arm, engage the stopper arm adjustment handwheel inward. Secure it to the external adjustment axis, then rotate the handwheel for precise adjustments.

Vertical Oscillation Adjustment

Manipulate the manual valve to the ascent position, prompting the front stopper arm to swing upward. Conversely, setting the manual valve to the descent position causes the arm to pivot downward. At the middle position, the front stopper arm comes to a halt.

Rear Stopper Arm Adjustment

Withdraw the stopper arm handwheel outward, securing it onto the internal adjustment axis. Rotate the handwheel to effectively adjust the rear stopper arm’s forward-backward movement.

Material Loading Procedure

Efficient material loading is a crucial aspect of the 3-in-1 decoiler straightener feeder’s performance. Follow these steps for optimal results:

1. Prepare the Stopper Arms:
   • Elevate the material pressing arm, securing the inner stopper arm in the desired position.
   • Initiate the hydraulic station’s decoiler tile expansion/reduction switch, ensuring the tile diameter is 20-30mm smaller than the material’s inner diameter.
2. Secure Material in Place:
   • Suspend the material, positioning it near the inner stopper arm.
   • Activate the tile hydraulic expansion button to tightly support the material’s inner ring.
   • Adjust the outer stopper arm to approximately 10mm from the material’s side.
   • Lower the material pressing arm and press the material roller tightly against the outer diameter.
3. Optional Loading Platform (if applicable):
   • For machines with a loading platform, hoist the material onto it.
   • Activate the lift button to bring the material to a suitable height.
   • Utilize the forward button to load the material onto the decoiler tile.
4. Commence Feeding Operations:
   • Loosen the material straps.
   • Coordinate with the material support arm.
   • Activate the material entry arm hydraulic switch.
   • Allow the material to gradually enter the feeding machine’s pressure roller, initiating the leveling and feeding processes.

By embracing these advanced features and efficient procedures, the 3-in-1 decoiler straightener feeder proves to be a game-changer in the world of metal processing machinery, ensuring precision, flexibility, and optimal performance.