Pallet decoiling machines are integral to high-speed stamping operations, working alongside high-speed presses to facilitate the decoiling process. This is especially crucial when working with thin sheets and lightweight coils, such as those found in electronic terminals and mobile phone accessories. In this article, we will explore the benefits, usage recommendations, and operating procedures for pallet decoiling machines, ensuring you get the most out of your equipment.

Unraveling the Potential: Principles and Advantages of Pallet Decoiling Machines

Pallet decoiling machines use a pallet uncoiling method, powered by a motor-driven flat loading plate with a friction transmission operating structure. The decoiling speed is managed through the coordination of an inverter, rocker arm, microswitch, and support wheel. These machines boast a sturdy construction, allowing for coil stacking, adjustable speeds, and user-friendly operation. They are compatible with any high-speed press.

Playing It Safe: Precautions for Using Pallet Decoiling Machines

Standard pallet decoiling machines can accommodate larger coil outer diameters of 1000-1200mm (customizable if larger), a maximum coil stacking height of 500mm, a rapid feeding speed of 30m/min, a material width of 0-120mm, and a material thickness of 0-1.0mm. Before using the machine, carefully inspect the material properties and avoid exceeding the machine’s applicable range.

The standard voltage for the YTE-1010 model is 220V, while other models operate at 380V.

Smooth Operator: Step-by-Step Procedures for Pallet Decoiling Machines

  1. Adjust support wheel and rocker arm: Based on the thickness, weight, and width of the stacked coils, modify the positions of the support wheel and rocker arm accordingly.
  2. Check plastic and microswitch positioning: Ensure the plastic and microswitch are located in the more recessed cam. Adjust as needed.
  3. Set the origin: Align the square aluminum block with the microswitch by making contact.
  4. Establish the limit: Connect the limit’s misfeed line to the press emergency switch. The press will automatically halt when the rocker arm comes into contact with the right side of the microswitch.
  5. Increase the decoiling speed: To speed up the process, turn the speed potentiometer adjustment switch near the misfeed switch on the control line box from left to right.

By following these guidelines and procedures, you can ensure optimal performance and efficiency from your pallet decoiling machines. This, in turn, will lead to more streamlined stamping operations, enhancing productivity and the quality of your finished products.

pallet decoiler
pallet decoiler