Precision leveling machine is also called precision straightening machine, precision leveling machine, etc. It belongs to the kind of leveling machine. It is different from ordinary leveling machine, and its precision is higher. The flatness is higher.
A. Precision leveling machine function
The precision leveling machine will reduce the uneven metal sheet by pressing the strip or sheet with a certain thickness through the upper and lower rolls to achieve the flattening effect. It is called a precision leveling machine.
B. The leveling machine is classified into
precision leveling machine (opening type), precision material leveling machine, simple precision leveling machine, precision (thin plate) material leveling machine, etc., choose a suitable precision leveler depending on the material and the leveling requirements.
C. Precision leveling machine performance
- Suitable for all kinds of thin plate materials with high leveling precision.
- This machine is a powerful and powerful new equipment for high-punching work, which can improve the quality of punch products.
- The coil material is not leveled to eliminate the internal stress, and it is impossible to produce a good punching piece. Only when the coil material is leveled, the internal stress can be eliminated.
- After the machine is leveled, the material can be corrected to bend downward or flat.
- The transmission and the inverter (circulation control) can be synchronized in the punching machine and balanced feeding.
- During the GJ two-stage leveling process (head end—–tail end), there is no need to adjust the flattening in the middle to ensure the same flatness and can feed in forward and reverse directions.
- 8 points independent adjustment of the drum (using the Japanese Mitutoyo dialect), with a material width of 300MM or more with a roller reinforcement.
- The inverter is adjusted and runs smoothly. Special models can be produced according to customer requirements.
The leveling machine is a powerful new device for high-speed stamping work, which can improve the quality and quantity of punch products. At the end of the coiling, the stress cannot be produced by leveling to eliminate the stress. Only when the coil is leveled, the stress can be eliminated. After the machine is leveled, the material can be corrected to bend downward or flat. The transmission and the inverter (circulation control) can be synchronized with the punching speed and balanced feeding.