3 in 1 uncoiler straightener feeder features:
1. It integrates the three functions of servo feeder, coil straightener and uncoiler, which reduces the error during feeding and leveling and meets the high-precision requirements.
2. It is easy to install and can greatly save the floor space.
3. Automated production not only improves the production efficiency, but also reduces the production cost and labor intensity of the operator. It is the preferred equipment for the majority of auto parts industry and metal stamping parts manufacturers.
3 in 1 uncoiler straightener feeder structure features:
1. Uncoiler part:
The hydraulic expansion system is adopted, which has high reliability, low labor intensity and good safety. And equipped with a pressing arm, so that the material will not be loose. The feeding adopts the photoelectric induction system, and the feeding is automatic. At the same time, it adopts pneumatic to hold up the material, and controls the radian of the material to make the material feeding smoothly.
2. Leveling part:
The leveling roller is made of high-quality round steel after high-frequency quenching, and after hard chrome plating, the surface hardness can reach above HRC60℃. The upper roller adopts a 4-point fine-tuning structure, and the downward pressure is adjusted by a worm gear, which is light and labor-saving, and has high adjustment accuracy. The loose part of the leveling adopts the eccentric shaft mechanism, which is flexible and high precision. Moreover, the electric signal given by the punching machine can be used to relax quickly, press down strongly, and guide the material accurately.
3. Feeding part:
3.1. It adopts the original Japanese Yaskawa (Mitsubishi) high-efficiency servo system control, which is simple and fast to operate, effectively shortens the work preparation time and improves production efficiency.
3.2. Fuselage structure: one-piece molding, precise structure.
3.3. The feed roller is heat-treated, plated with HRC60℃ hard chrome and then ground. It has high hardness, strong wear resistance and long service life. Moreover, the gears are fully ground, and the movement noise is small.
3.4. The upper and lower feeding rollers adopt a gapless transmission structure to improve feeding accuracy.
4. Discharge part:
The discharge height adopts the worm gear lifting system, which can be adjusted according to the mold line of the punching machine, and the adjustment range can reach 150mm. It is suitable for the mold height of products with different specifications by users, and the adjustment is convenient, labor-saving and reliable.
5. Electronic control part:
Adopt Japan Yaskawa (Mitsubishi) complete set of servo control system (Japan Yaskawa (Mitsubishi) PLC operation panel, driver, servo motor, time limiter, etc.), to achieve high-precision positioning. Through the man-machine interface, various parameters and operating conditions during operation can be monitored at any time. At the same time, various parameters can be set conveniently and quickly through the man-machine interface.
评一波