Introduction

Setting the correct material thickness on a 3 in 1 decoiler straightener feeder is crucial for ensuring feeding accuracy and preventing material slippage.

The adjustment process is simple and is done entirely through the dial located on the rotary gripper bracket. To prevent changes due to machine vibration, the system includes a handle-style locking mechanism that must be released before making adjustments.

Decoiler Straightener Feeder

1. Understanding the Adjustment Dial

Before adjusting the 3 in 1 decoiler straightener feeder, it is important to understand how the dial works:

  • Dial Range: The scale ranges from 0 to 1mm.

  • Rotation Direction:

    • Clockwise: Reduces the thickness setting (Increases gripping force).

    • Counter-Clockwise: Increases the thickness setting (Decreases gripping force).

  • Note: The actual thickness adjustment is typically fine-tuned within 1mm. Please confirm visually during setup.

2. Step-by-Step Adjustment Procedure

Follow these steps to set the thickness correctly on your 3 in 1 decoiler straightener feeder:

Step 1: Unlock the Mechanism Locate the locking handle on the bracket. Lift the handle upright to release (unlock) the mechanism. You cannot rotate the dial while it is locked.

Step 2: Rotate the Dial Rotate the dial until the number corresponding to your material thickness aligns with the reference line on the bracket.

  • Example: If your material thickness is 0.25mm, rotate the dial so that the mark “0.25” aligns perfectly with the reference line on the bracket.

Step 3: Synchronize Both Sides (Critical) The material thickness setting must be performed on both sides simultaneously:

  1. Feeding Side Gripper Bracket.

  2. Stopping Side Gripper Bracket. Ensure both dials are set to the exact same value (e.g., both at 0.25mm).

Step 4: Lock the Handle Once the value is set, push the locking handle back down to lock the mechanism. This prevents the setting from shifting during the operation of the 3 in 1 decoiler straightener feeder.

Decoiler Straightener Feeder
Decoiler Straightener Feeder

FAQ about 3 in 1 Decoiler Straightener Feeders

Q1: What is the range of the thickness adjustment dial?

A: The dial usually has a range of 0-1mm. It is designed for fine-tuning the grip gap relative to the material thickness.

Q2: Which way should I turn the dial to increase gripping force?

A: Turn the dial Clockwise. This reduces the thickness setting, thereby narrowing the gap and increasing the gripping force on the material.

Q3: Do I need to adjust both clamps?

A: Yes, absolutely. You must adjust the dials on both the Feeding Side Bracket and the Stopping Side Bracket to the same value to ensure even feeding.

Q4: Why can’t I turn the dial?

A: Check if the locking handle is engaged. You must lift the handle to the unlocked position before you can rotate the dial.

Related Products

Explore complementary Henli equipment for complete coil handling, feeding, leveling, and lubrication workflows.

Decoiler machine for metal coil feeding lines Decoiler Machine Motorized and manual coil uncoiling options for stamping, roll forming, laser cutting, and shearing lines. NC servo feeder for press feeding automation NC Servo Feeder High-precision servo roll feeding for power press and punching machine automation. UL 2-in-1 decoiler straightener for coil stock UL 2-in-1 Decoiler Straightener Compact decoiling and straightening for 0.35-3.2 mm coil stock in stamping lines. Precision sheet metal leveler and coil straightening machine Precision Sheet & Coil Leveler Precision leveling for coil strip and cut sheets where flatness and surface protection matter. Gravity feed stock oiler for press feeding lines Gravity Feed Stock Oiler Stock lubrication systems for controlled oiling before stamping, forming, or feeding operations.