3 in 1 servo feeder machine is greatly using in hardware manufacturing industry because the advantage of save working space, high efficient, and save the cost. However, after using for a long time of the 3 in 1 servo feeder machine, its hydraulic component easy broken, then will be affect the normal operation of the machine. So how to maintain the hydraulic components of the 3 in 1 servo feeder machine? Today, HENLI machine will share the maintenance knowledge with all of our customers.

1                Point A

In fact, it is necessary that check the working condition of hydraulic components, which can find the problem and solve it when 3 in 1 servo feeder in working condition. Before the machine start operation, need to pay attention to the amount of the oil, make sure the equipment setting number in the range. The oil thermometer also need to be checked, temperature too low will seriously effect machine operation. At this moment, electric-heater will increase the oil temperature then check again.

2                Point B

In conclusion, during using the 3 in 1 servo feeder machine, observe the oil thermometer is very importance. Especially the oil temperature control equipment change under the working condition and reaction quickly, if oil leaking, temperature will be very high.

3                Point C

Oil Gauge

Hydraulic Station is equipped on decoiling machine or uncoiling unit on compact model. Which provides expanding power and action control

In addition to the above mention of daily checking 3 in 1 servo feeder machine, need to check the equipment inner part on time. During the machine checking, machine need to totally stop to operation, then checking on time 2 times per week. The checking items as follow,

  1. It is can be calculated the oil amount by oil level gauge, which make sure the oil amount in the standard range.
  2. Checking the thermometer, it is necessary that use the electric heater or warm machine operation when the oil temperature too low.
  3. Checking the abnormal of the pressure gauge.
  4. Checking the maintenance situation of postbox, if there are oil leaking or rusty, need to repair on time then checking the oil pump loose or nor, at last, checking the plumbing system if in the normal situation or nor.
  5. Checking all equipment inner part (oil thermometer, cooling equipment, oil filter, and pressure gauge etc.) if there are air inside or nor, then clear the exhaust timely.

It is can greatly extend the using life of 3 in 1 servo feeder machine that maintain the stamping servo feeder machine’s hydraulic component. Dongguan HENLI machine is manufacturing stamping auto feeding equipment, with 20 years industry experience. If you want to know more information of the 3 in 1 servo feeder machine, please kindly contact us in 24 hours or login our website.