The setting of the material thickness of the coil feed line only needs to be done through the dial on the rotary clamp bracket. In order to avoid the influence of vibration, etc., there is a handle-type locking mechanism, which is released first when setting.

The range of the dial of the coil feed line is 0-1mm, the thickness is reduced by clockwise rotation, and the thickness is increased by counterclockwise rotation. The actual thickness is within 1mm, not more than 1mm, please confirm visually.

The setting method of the material thickness of the coil feed line:
1. Unlock the dial.
2. Rotate the dial to align the required material thickness.

The setting of material thickness should be carried out on the bracket on the feed side clip and the bracket on the stop edge clip at the same time. For example: if the material thickness is 0.25mm, align the scale 0.25 on the dial with the reference line on the bracket, and so on.

The above is the setting method of the material thickness of the coil feed line, I hope it will be helpful to everyone.