Henli’s 3 in 1 NC servo uncoiler straightener&feeder is accurate, built to handle a wide range of material width from 300 mm to 2000 mm and thickness from 0.3 mm to 6.0 mm, and can reduce waste. The ergonomic design of our coil feeder system provides more efficient operation and enhanced capabilities to meet your specific press room needs. Let me show you how we produce our 3 in 1 NC servo uncoiler straightener&feeder from a pair of full tracking eyes.
1. Semi productof 3 in 1 NC servo uncoiler straightener&feeder
2. Finished product of 3 in 1 NC servo uncoiler straightener&feeder
1) Feed-in car
Our feed-in car of 3 in 1 NC servo uncoiler straightener&feeder adopts a special holder type, whose bearing surface is in the form of a V-shaped bevel. This can perfectly prevent coil from dropping down the feed-in car, fixed enough.
2) Automatic oil-feeding device
If customers need to lubricate the material, mostly by cooling oil. Then you can add this device at the exit of 3 in 1 NC servo uncoiler straightener&feeder. You can set how much you need to add per minute, controlled by our touching screen.
3. Shipping product of 3 in 1 NC servo uncoiler straightener&feeder
You can see our Youtube link of daily shipping photo and videos
4. Customer site of 3 in 1 NC servo uncoiler straightener&feeder
Look at tLook at these two beautiful 3 in 1 NC servo uncoiler straightener&feeders of NCHL-800B and NCHL-1300C. Cooperated with Yangli press, they will bring much more efficiency to customer’s production.
Finally, above is the full tracking of these two 3 in 1 NC servo uncoiler straightener&feeders of NCHL-800B and NCHL-1300C. More tracking information of production and after-sales will be shown in future news. You can also scan the feeder on our alibaba website
Welcome to contact us if you have any questions!
评一波