Introduction
With the improvement in the quality and automation level of punching presses, sheet metal stamping is evolving towards high-speed, high-precision, and efficient processing. CNC punching presses, in particular, have become increasingly popular, as they meet the demand for automation and high processing efficiency. However, many medium and low-end customers face challenges due to the high cost of CNC punching presses, which makes them unaffordable. A practical solution to meet the same processing requirements at a lower cost is to add high-precision feeding devices to precision presses. This modification can provide affordable options while ensuring accurate hole and slot processing. However, challenges still arise during the stamping process, such as large fluctuating impact loads, leading to feeding precision issues and difficulty in synchronizing the feeding mechanism with the punching cycle.
Feeding Mechanism Challenges and Solutions
In traditional pneumatic or roller feeding systems, feeding accuracy is often compromised due to inconsistent feeding and release actions, poor synchronization with the mold punching cycle, and the inability to adapt to the press’s stamping speed. The use of NC (Numerical Control) servo feeders offers a solution to these problems, ensuring a more reliable and high-precision feeding process.
The integration of NC servo feeders with precision presses is enhanced by the use of a rotary encoder on the press. The encoder detects the precise position of the press’s crankshaft, allowing the controller to send instructions to the NC servo feeder for feeding, releasing, returning, and clamping actions. This system ensures that the feeding process is accurately completed, addressing common issues such as delayed or inaccurate release actions.
How NC Servo Feeders Work with Precision Presses
The rotary encoder on a precision press detects the crankshaft’s position, providing real-time data to the controller. When the crankshaft reaches the 240° mark, the feeding action is initiated and the servo feeder follows the press’s movement to feed material steadily until the crankshaft reaches the 90° position. This method optimizes the use of the entire feeding interval, ensuring that the feeding process is synchronized with the press’s cycle. Additionally, the servo drive ensures minimal energy loss, as the driving current is small and stable, resulting in less wear and tear on the feeder and extended equipment lifespan.
Angle Compensation and High-Speed Feeding
A key feature of NC servo feeders is the angle compensation function, which is essential for high-precision feeding in automated production lines. As feeding continues over extended periods, errors may accumulate, causing misfeeds or overfeeds. NC servo feeders address this by including a release function that compensates for any potential errors. The release mechanism, typically controlled by an electromagnetic valve, moves the cylinder to release the material after the feeder has completed its operation.
In high-speed applications, the traditional electromagnetic valve may fail to respond promptly due to its inherent delay. However, with the addition of the press’s rotary encoder, the control system can detect the press’s running speed and adjust the release mechanism accordingly. By pre-compensating the release angle based on the press’s speed, the feeder can ensure timely and accurate release actions, even during high-speed operation.
Conclusion
Integrating NC servo feeders with precision presses can greatly enhance the performance of automated stamping production lines. This combination optimizes feeding accuracy, increases the range of servo feeding applications, reduces energy consumption, and extends the service life of the equipment. With features like angle compensation and real-time speed adjustments, NC servo feeders ensure high-speed, high-precision feeding, making them an ideal choice for improving the efficiency and quality of modern stamping processes.



























































