Executive Summary:
-
A modern lithium battery aluminum case stamping line relies on a high-tonnage framework, integrating a 1300mm 2-in-1 decoiler straightener, an NC servo feeder, and a 1200-ton stamping press to mass-produce precision battery shells.
-
Engineered to handle aluminum coils weighing up to 15 tons, the system continuously feeds and blanks material widths of 70mm to 1300mm and thicknesses ranging from 0.8mm to 2.8mm.
-
A specialized flip-top straightener head enables one-minute roller cleaning, completely eliminating surface marking—a strict quality control requirement for high-energy-density battery casings.
-
Synchronized motorized pass-line height adjustment and high-capacity progressive dies minimize setup times and eliminate manual intervention errors during high-speed blanking.
What Constitutes a Lithium Battery Aluminum Case Stamping Line?
Processing raw aluminum coil into flawless battery enclosures demands strict tension control, precision feeding, and immense blanking force. A standard automated line designed for this specific metallurgical task operates through three synchronized stages:
-
Material Payoff and Stress Relief: The Decoiler safely unwinds the heavy aluminum master coil, while the integrated Straightener removes coil set and internal material stress.
-
Precision Indexing: The NC Servo Feeder drives the flattened aluminum strip into the die area at exact pitch lengths.
-
High-Force Blanking: A high-rigidity Stamping Press utilizes progressive dies to punch, draw, and blank the final cylindrical or prismatic aluminum shells.
How Does the 2-in-1 Decoiler Straightener Uncoil and Flatten 15-Ton Aluminum Coils?
Handling a 15-ton aluminum coil requires robust mechanical support to prevent material telescoping and equipment failure. The payoff system utilizes a hydraulic wedge expansion mandrel to tightly grip the inner diameter of the coil. To counteract the massive cantilevered weight, a hydraulic spindle support device engages the free end of the mandrel, maintaining absolute shaft horizontality.
An automated hold-down arm guides the leading edge of the coil directly into the pinch rolls of the straightener.
Once inside the straightener, the aluminum strip passes through a staggered bank of 11 leveling rollers. This process aggressively works the material, yielding it past its elastic limit to eliminate internal stresses and coil set. Flatness is paramount; any residual bow or camber will cause the aluminum to jam within the tight tolerances of the progressive die.
To combat aluminum galling and debris buildup, this specific machine features a flip-top straightener head. Maintenance personnel can pneumatically lift the upper roller bank to perform a complete roller wipe-down in exactly 60 seconds, guaranteeing a scratch-free surface for the battery shells.
How Does the NC Servo Feeder Drive Precision Blanking?
Once flattened, the aluminum strip enters the NC Servo Feeder. This unit dictates the production rhythm. Utilizing closed-loop servo motors, the feeder indexes the material into the press with sub-millimeter accuracy. Consistent pitch length is non-negotiable; inconsistent feeding leads to mis-hits, destroyed tooling, and rejected parts.
To accommodate different progressive dies, the feeder incorporates a motorized pass-line height adjustment system. Instead of manually shimming the feeder, operators press a button to raise or lower the feed line, aligning it perfectly with the die entry height in seconds. This greatly accelerates the Quick Die Change (QDC) process.
Why is a 1200-Ton Stamping Press Required for Battery Shell Production?
Battery manufacturers specify aluminum for its thermal conductivity and lightweight properties, but deep-drawing and blanking thick aluminum (up to 2.8mm) across a wide strip (up to 1300mm) requires massive tonnage.
The 1200-ton Stamping Press delivers the necessary kinetic energy to drive large, multi-station progressive dies. This high tonnage ensures minimal frame deflection during the impact stroke. Rigid frame architecture translates directly to tighter dimensional tolerances and uniform wall thickness in the finished battery cases, preventing rupture during thermal expansion in the end-use battery pack.
Core System Specifications
| Technical Parameter | Specification Data | Application Impact |
|---|---|---|
| Max Coil Weight | 15 Tons | Maximizes production run time between coil changeovers. |
| Material Width | 70mm - 1300mm | Accommodates a wide range of battery shell sizes (cylindrical/prismatic). |
| Material Thickness | 0.8mm - 2.8mm | Covers standard structural requirements for EV and energy storage batteries. |
| Leveling Rollers | 11 Rollers | Ensures complete stress relief and high-precision strip flatness. |
| Cleaning Mechanism | Flip-Top Head (1 min) | Prevents aluminum dust buildup and surface scratching. |
| Blanking Force | 1200 Tons | Provides absolute rigidity for large-scale progressive die stamping. |
By synchronizing these heavy-duty mechanical assets, battery stamping plants achieve a highly automated, low-defect production cycle, driving down overhead costs while meeting the severe quality demands of the energy sector.



























































