There are many kinds of 2 in 1 decoiler and straightener machine, most customers may only know UL type or SHL type. Actually, we have one more economic type for small width coil, that is CL type. This model no needs to care about coil inner diameter, only ensure that the outer diameter is not bigger than 1000mm. And its weight can’t be big, max weight is 500kg for the smallest model. Width, thickness and straightening performance are the same according to UL type 2 in 1 decoiler and straightener machine. Here are some photos and basic specs as following:

You can see there are two fixed plates in the middle of CL type 2 in 1 decoiler and straightener machine. Coil material is set along with the feeding direction. These fixed plates can clamp them tightly and prevent from spreading out, which is quite good use for those small width coil materials like width less than 50mm.

Here we would like to show you the YouTube video link of how our CL type 2 in 1 decoiler and straightener machine operate and how it behaved at our customer’s site. See the link as below:

https://www.youtube.com/watch?v=R6V04sk3LUY

In the first part of video, our worker was adjusting the gap between two fixed plates to suit with bigger width coil, which is easy to operate by manual. It is really suitable for quite small width uncoiling and feeding, which is more better than UL type 2 in 1 decoiler and straightener machine. It can equips with air feeder, high speed roller feeder and NC servo roll feeder. It is suitable for small metal product production.