July 6th to July 9th was the Amtex Fair at Pragati Maidan, New Delhi, Inida. We participated in it with our distributor in New Delhi named MARK-UP PROCUREMENT SERVICES PVT. LTD. Let’s call MPS in the following statement. The leading product this time is our 3 in 1 decoiler straightener NC servo roll feeder. If you’re customer in India who needs a coil automation solution for metal stamping, just feel free to contact us or MPS. We’ll choose the suitable 3 in 1 decoiler straightener NC servo roll feeder or separate machines of them. Here’s the photo of our booth as below:

Brief introduction

The above-mentioned photo is one of our posters. This is what we’re doing and our main products. There are four series of 3 in 1 decoiler straightener NC servo roll feeder, which is a combination of decoiler, straightener and NC servo roll feeder. These can be used in home appliance, automobile company factories. They are very hot in companies who make cars, mobiles, air conditioner, refrigerators, etc. Firstly, coil car is our selective equipment. You may need this mostly for more than 3 tons coils. Next selective equipment is pressing arm, material thickness more than 2mm you may need this. Straightener and feeder are inside one body. Coil is put on the decoiler and uncoiling, then feed in this direction and go out to punch press at last. And then move on the next part: feeders.

The procedure of 3 in 1 decoiler straightener NC servo roll feeder: First decoiler, put the coil on this and then uncoiling. The width from 200mm to 2000mm width we can make. Second, straightener. Another 2 in 1 straightener is for small material, decoiling and straightening. Put the coil on the decoiler, then feed through the straightener head, and then feed to the third NC servo roll feeder. It is fed by servo feeder and PLC control. The more details you can refer to our product of 3 in 1 decoiler straightener NC servo roll feeder.

You can see the complete alive video of introduction on our YouTube channel as follows: