A circle blanking line with a zigzag feeder is an automatic press line for round metal blanks. Between press strokes, the zigzag servo feeder moves the strip forward and sideways, so the die punches circles in staggered rows across the strip width, with every circle cut directly from the coil instead of from slit strips or cut sheets. The same line is also called a zig zag blanking line, zigzag auto blanking line, zig zag circle cutting line or disc blanking line. It is a press-and-die line, not a circle shear or a laser cutter; the FAQ below compares the three methods.

A zigzag blanking press line consists of a heavy decoiler machine, a leveler machine, a zigzag NC feeder machine, a punch press and an automatic receiving machine. After each stamping stroke is completed, the automatic zigzag feeder drives the steel strip in the press forward by an appropriate distance and, at the same time, moves it by an appropriate distance in the lateral direction. This can improve the material utilization rate compared with straight feeding and bring huge economic benefits.

Performance Characteristics:

The zigzag blanking production line is specially designed for blanking wafers (circle blanks). It adopts double-axis alternating feeding to move the material in a two-dimensional plane, which increases the number of blanks punched from the strip and lets neighboring circles nest closely between one another. It not only makes full use of the raw material but also effectively improves work efficiency. Compared with the conventional blanking mode of linear feeding, it greatly improves production efficiency and reduces labor costs, while raising the material utilization rate and bringing huge economic benefits.

Applicable materials: metal coil, such as stainless steel and aluminum. Material thickness, strip width and maximum circle diameter are matched to your coil and blank sizes when the line is configured.

Production line composition and operation principle:

A zigzag blanking press line consists of a heavy decoiler machine, a leveler machine, a zigzag NC feeder machine, a punch press and an automatic receiving machine. After each stamping stroke is completed, the automatic zigzag feeder drives the steel strip in the press forward by an appropriate distance and, at the same time, moves it by an appropriate distance in the lateral direction. This makes the gap between the next punched disc and the last punched disc smaller and effectively reduces the corner waste. Meanwhile, the stamped products fall onto the conveyor belt and are sent out, so workers can remove the products from the conveyor belt while the press is working, and the finished scrap is automatically rewound by the automatic rewinder. This greatly reduces the labor intensity of workers and is a production method that can improve production efficiency and reduce production cost.

Besides the conveyor belt, finished circles can be collected by an optional blank stacker. After circular blanking, the remaining scrap skeleton is either wound up by a scrap winder (the automatic rewinder above) or cut into short pieces by a scrap shear. On light, narrow strip, a CR light-duty recoiler can serve as the scrap winder.

nc servo zig-zag feeder line
Heavy-duty circle blanking line with zigzag servo feeder

Large circle cutting line for stainless steel and aluminum circles

Built for wide, heavy coils, this line works as an automatic stainless steel circle cutting machine and also handles aluminum (aluminium) circle cutting: the press and die punch circles straight from the coil instead of cutting them one at a time on a circle shear.

Description:

The heavy circle cutting production line consists of a movable heavy duty decoiler, a large thick plate leveler and a large NC servo zigzag feeder. The punching position of each circle is adjusted by the yaw move (lateral shift), so the material is used as fully as possible. The large leveler keeps the material flat and relieves internal stress, so every circle is punched from flat strip.

Composition:

Movable heavy duty decoiler + large thick plate leveler + large NC servo zigzag feeder

Typical applications, from cookware circle blanking to motor and auto parts:

  • Stainless steel circles and aluminum circles
  • Cookware blanks: deep-drawing blanks for stainless steel and aluminum pots, pan covers and bowls, and parts for kitchen and small appliances
  • Water heater liners
  • Water pump impeller blanks
  • Stator and rotor lamination blanks for motors (for small laminations on progressive dies, see our high-speed motor lamination stamping line)
  • Lighting products
  • Auto parts, including clutch-related parts
  • Other stainless steel products

Part:
1. Movable heavy duty decoiler

Because the zigzag feeder makes a large sideways swing while working, the decoiler has to stay synchronized with it, so that the strip is not damaged and feeding accuracy is maintained. HENLI’s decoiler travels on slide rails, moved by hydraulic power, and is fitted with disc brakes and roller-type hold-down arms to keep decoiling reliable, stable and consistently synchronized with the NC servo zigzag feeder.

2. Large thick plate leveler

Used with the NC servo feeder, this heavy-duty leveler corrects the curvature of the material with its leveling rollers, so the strip passes through the die smoothly and the circles come out flat. The feed rollers and leveling rollers are raised and lowered by worm-gear screw jacks, and springs take up the backlash in the jacks. All rollers are hard chrome-plated for a long service life.

3. Large NC servo zigzag feeder

The zigzag device shifts the NC servo feeder and sets the punching position of each circle by yaw shift (lateral shift) for the highest possible material utilization. The main structure of HENLI’s NC servo zigzag feeder consists of linear guides, ball screws, fixed seats and work frames, which reduce friction, allow high-speed movement and improve production efficiency.

On the HMI, enter the strip width and the circle diameter from the part drawing; the system works out a suitable nesting layout and saves the settings for higher material utilization.

Large circle zigzag production line

2-in-1 decoiler leveler, zigzag feeding machine and 3-axis robot arm

Line configuration: 2-in-1 decoiler and leveler + zigzag feeding machine + 3-axis robot arm.

Zigzag press feeding line in operation

A short HENLI video of the line at work (0:58).

Circle blanking line FAQ

What is a circle blanking line?

A circle blanking line is an automatic coil line that punches round blanks (circles or discs) out of metal coil. A decoiler pays out the coil, a leveler flattens the strip, a servo feeder indexes it into a punch press, and the die blanks the circles. With a zigzag servo feeder, the strip also shifts sideways between strokes, so the circles are punched in staggered rows and more of the strip width is used than with straight feeding. For the calculation, see our guide to circle blanking material utilization.

Is a zigzag blanking line the same as a circle cutting machine or circle shear?

It is one kind of circle cutting machine for metal, but it does not cut like a circle shear. Metal circles are usually made in one of three ways. A punch press with a zigzag feeder blanks circles continuously from coil, which suits high-volume runs, and the staggered layout saves material. A circle shear (circular shearing machine) cuts circles one at a time from square sheets and suits smaller batches. Laser blanking cuts each circle along its outline and suits short runs and non-round shapes. A zigzag blanking line, also sold as a zig zag circle cutting machine, zigzag circle blanking machine or circle punching machine, is the press-and-die method.

What equipment makes up a complete zigzag blanking line?

A typical line starts with a decoiler and a leveler sized to the coil: on lighter strip, a hydraulic decoiler and a precision leveler or a 2-in-1 decoiler-leveler; on wide or thick coil, a movable heavy-duty decoiler with a heavy-duty leveler. Next come the zigzag servo feeder and a punch press with the blanking die. Circles leave on a conveyor or go to an optional stacker, and the scrap skeleton goes to a scrap winder or scrap shear. On wide coil, the decoiler travels on slide rails to follow the sideways shift of the feeder, and a 3-axis robot arm can be added to the line.

Which circles and products can the line make?

It punches stainless steel circles and aluminum circles from coil. Typical uses are deep-drawing blanks for cookware such as pots, pan covers and bowls, and parts for kitchen and small appliances. Other uses include water pump impeller blanks, stator and rotor lamination blanks, lighting products and auto parts, including clutch-related parts.

Does the coil need to be slit into narrow strips first?

Usually not. Because the zigzag feeder shifts the strip from side to side, the circles are punched in staggered rows across the coil width, up to the maximum strip width of the line. Slitting the coil into narrow strips for single-row blanking is not needed, which saves a process step and reduces the corner scrap between rows.

What information do you need for a quotation?

Send us the material type and thickness, coil width, coil weight and coil I.D./O.D., the circle diameters and drawings, and the output you need. Tell us the press you use or plan to use (tonnage, stroke rate and die layout) and how the circles and scrap should be handled. Let us know whether you need the complete line or only the zigzag servo feeder.

Further reading: How zigzag circle cutting works: process and selection → · Uncoiler selection for an aluminum cookware blanking line →