Model Series: NCHL-GD
Supply Ability: 10 Set/Sets per Month
Packaging Details: standard export wooden cases, sealed with stretch film.
Warranty: 1 Year
After-sales Service Provided: Engineers available to service machinery overseas
Material:Medium and high strength steel plate
Material Thickness：1.0～6.0 mm Note: Please refer to the correction ability table for thickness x width
Material Width：100 ～ 1800 mm
Yield Strength ：≤1370 N/mm2
Coil Inner Diameter:Φ450~φ530mm/φ480~φ530mm/φ580~φ630mm
Coil Outside Diameter:max φ 1600 mm
1.Electric eye loop control system
2.Outgoing catenary to assist and support the material
3.Hold down arms device
4.Hold up arm for sheet feeding in
5.Feeding line easily adjusts by advance worm gear screw jacks device
6.Touch screen control for leveling setting
7.The uncoiler contain the butterfly brakes air compressor
9.Feed and staightener rolls with a hard chrome finished
10.Up and down device for feeding in sheet loop
11.Coil tip flattness device
12.Coil holding arms
13.Hold down arms with motor
14.Electrical oil lubricating equipment
|Width of Material (mm)||50-400||50-500||50-600||50-800||50-1000||50-1300|
|Thickness of Material (mm)||0.8-6.0|
|Max. Coil Weight (Kg)||5000||6000||8000|
|Max. Speed (m/min)||16|
|Feed Accuracy||+/- 0.1/100mm|
|Work Rollers||Up 3/ Down 4|
|Feed Line Height||Accoring to customers’ Requirements|
|Power Supply||3-Phrase 380V|
|Power Supply||5 (Kg/cm2)|
|Uncoil Expansion||Hydraulic Expansion|
|Servo Motor (Kw)||4.4||5.5||7.5||11|
|Uncoil Motor (Kw)||3||4|
|Machine Size (m)||5×2.5
|Machine Weight (Kg)||5290||5350||5600||6500||9000||9450|
It is used to smoothly transfer the coil to the spindle of coil shaft.It is used to lift the stripend so that the sheet can smoothly enter the leveling machine.Coil car is provided with a material roll anti-dumping baffle.It can effectively prevent the roll from falling over when the metal coil is narrow.
Uncoiling spindle support arm
driven by hydraulic cylinder, the support arm supports the end of the uncoiling spindle after loading, thereby balancing the gravity of the main bearing, improving the stability of the uncoiling, and increasing the service life of the spindle.
material head and tail deformation is large,can not be corrected used to cut the material head,tail.
Automatic Double-sided Oiler
automatic oiling of the upper and lower surfaces of the material.
Double/triple Auxiliary Feeding Table
Suitable for extra large punching table,use wear-resistant stainless steel Gear Wheel,the length can be adjusted freely,so that the material can smoothly enter the stamping die.