High Speed Servo Feed Machine for Stamping PressHENLI2026-07-02T17:22:06+08:00
ย
GCD Series | High-Speed Press Feeding
High Speed Servo Feed Machine
Henli GCD high speed servo feed machine is a servo roll feeder for high-speed stamping presses. It is built for buyers who need repeatable coil strip pitch control, fast press synchronization and stable material release at high production speed, while keeping the configuration simpler than a dedicated double-servo lamination feeder. Henli supplies the feeder as part of a coil feeding line with decoiler, leveler and press-side integration support.
+/-0.02 mmReference feeding accuracy from Henli product data
600 RPMHigh-speed press application reference
0-9999.99 mmProgrammable feed length range reference
Servo roll feedUpper and lower roller feeding control
GCD-400 high speed servo feeder machine overview for high-speed press feeding.
Product Positioning
What this high speed servo feeder is designed to solve
A normal press line can often use an NC servo feeder, and a pneumatic air feed may fit simple short-pitch feeding. The GCD page is for buyers who specifically need a high speed servo feeder: servo-programmable pitch, roll feeding and release timing for a high-speed punch press. Material, pitch, die timing and press speed decide whether this feeder, a standard NC servo feeder, an air feed or a double-servo feeder is the better choice.
For thin to medium coil strip stamping where high-speed press timing and stable servo roll feeding are the main challenges.
For buyers who need servo-programmable feed length instead of mechanical gear-only adjustment.
For production teams that want a compact feeder matched with a high-speed press, leveler or coil feeding line.
For general high-speed stamping before the application requires a special one-feed-one-pull or double-servo architecture.
Updated product photo for buyers checking feeder structure, footprint and installation orientation.
Core Structure
Servo-controlled roll feeding with hardened mechanical components
For buyers comparing high precision servo feeder machines, the buyer value is not only the servo motor. It is the combination of roller grip, gear transmission, feed length control and release timing. Henli's current GCD product information highlights hardened rollers, precision gearing and an eccentric release structure for high-volume press feeding.
Dual-roller drive
Upper and lower rollers are used to feed coil strip in synchronization with the press signal, helping maintain stable feeding during high-speed stamping cycles.
Hardened roller surface
Current product notes reference GCr15 roller material, heat treatment, precision grinding and hard chrome surface treatment for durability and strip contact stability.
Mechanical release timing
The eccentric release mechanism is designed to reduce delay compared with conventional pneumatic-only release layouts and support smoother die debugging.
Feed roll access
Clear front access helps operators inspect the strip path, roller contact and feed direction.
Precision rollers
Roller rigidity and surface finish are important for repeatable coil strip feeding.
Servo drive side
Servo-driven feeding gives the operator programmable pitch control for different dies.
Front structure
Front machine view for checking feeder access, installation position and strip path.
Roller table detail
Shows strip support and entry guidance for buyers checking material handling details.
Side dial detail
Useful for explaining mechanical adjustment during setup, commissioning and mold changes.
Side adjustment and mechanical setting area for feeder commissioning and die change support.
Operator Setup
Built for fast setup without turning the page into a generic NC feeder
Unlike a broad feeder used across many press automation lines, the GCD is focused on high-speed punch press feeding where the production team needs repeatable pitch setting, compact roller control and release timing that can keep up with the press.
Touchscreen or controller-based feed length setup for different product pitches.
Mechanical adjustment points that support mold debugging and material thickness changes.
Dedicated high-speed press feeding positioning instead of a broad feeder for every machine type.
Works as one module in a coil line with decoiler, leveler and high-speed press.
Technical Parameters
GCD high speed servo feeder technical parameter table
Use this table to judge whether the feeder matches the press, die and strip material before requesting a quotation. Metric data is the main engineering reference; inch values below are quick conversions for quotation discussion with US and export buyers.
Metric referenceFeeding accuracy reference: +/-0.02 mm. Feed length setting reference: 0-9999.99 mm. Roller hardness and gear hardness remain HRC engineering values.
Imperial referenceFeeding accuracy reference: about +/-0.0008 in. Feed length setting reference: about 0-393.70 in. Confirm material width, thickness, pitch and press speed before model selection.
Product series
GCD high speed servo feed machine / high speed servo feeder
Feeder type
High-speed servo roll feeder for punch press feeding
Typical application
General high-speed stamping lines using coil strip and high-speed punch press equipment
Feeding principle
Servo-controlled roll feeding synchronized with press signal and release timing
Material width / thickness
Configured by feeder model and actual strip data; confirm with material width, thickness and press speed
Reference feeding accuracy
+/-0.02 mm from current Henli product information; final accuracy depends on press, die, material and commissioning
Reference high-speed capability
Current product information references 600 RPM high-speed press use; confirm against actual pitch, strip behavior and die timing
Feed length control
Programmable feed length, with current product information referencing 0-9999.99 mm setting range
Roller reference
GCr15 roller material, HRC60-62 heat treatment reference, precision grinding and hard chrome surface treatment from current product information
Gear reference
20CrMnTi gear material, HRC58-60 carburizing and quenching reference, DIN 6 accuracy class and +/-0.01 mm gear runout reference from current product information
Release structure
Eccentric release mechanism for high-speed press feeding and die debugging support
Important quote data
Material type, thickness, width, coil weight, feeding pitch, press model, strokes per minute, die release angle, layout drawing and automation options
For final model selection, Henli will match the feeder to the actual strip width, material thickness, feeding pitch, press speed and release timing. This helps avoid choosing a feeder only by name while missing the real press-line constraints.
Running Video
Watch GCD high-speed press feeding in operation
Use this short video to review feeder-line rhythm, strip movement and press synchronization before discussing feeding pitch, press speed and line layout with Henli.
Line Integration
Use the GCD feeder as the precision feeding module in a high-speed stamping line
A high speed servo feed machine is normally selected as part of a full front-end feeding system. Depending on the material and die, the line may include a decoiler, storage loop, straightener or leveler before the feeder sends strip into the high-speed press.
Feeder with leveler
For lines where flatness and strip stability need to be controlled before high-speed feeding.
Production line layout
Useful for buyers checking machine spacing, access and feeding direction before quotation.
Equipment group
Shows the feeder as one part of a coordinated high-speed press feeding system.
Selection Logic
GCD high speed servo feeder, NC servo feeder or GCH double servo feeder?
Use this comparison when deciding whether the line needs a high-speed servo roll feeder, a broader NC servo feeder or a specialized double-servo feeder for motor lamination production. It also helps separate this page from high speed air feed searches, which usually point to a different feeding method.
Choose GCD high speed servo feeder when...
The press is a high-speed punch press.
The application is general high-speed stamping.
You need servo pitch control and fast release timing.
The line does not require a one-feed-one-pull architecture.
Choose NC servo feeder when...
The line is a general power press, hydraulic press, laser, shearing or automation line.
The buyer needs a broad width and thickness model range.
High-speed press release timing is not the main problem.
The main intent is flexible programmable feeding.
Step up to GCH double servo when...
The material is thin silicon steel for stator or rotor laminations.
The press uses a wide bed, long pitch or demanding die timing.
The line requires one-feed-one-pull coordination.
Frequent mold changes make touchscreen stroke setup valuable.
If the application is actually a high speed air feed or mechanical roller feed, confirm the feeding principle before comparing prices. Servo roll feeding, air feeding and double-servo lamination feeding solve different press-line problems.
Related Technical Guides
Related technical guides for feeder selection
Use these compact references when the buyer needs more background on servo feeder type, high-speed press setup or narrow-strip applications before sending quotation data.
What is the difference between a high speed servo feed machine and a normal NC servo feeder?An NC servo feeder is a broad programmable roll feeder used with power presses, hydraulic presses, laser cutting, shearing and many automation lines. A high speed servo feed machine is more focused on high-speed punch press feeding, where release timing, compact roller control and high-speed synchronization are the main selection issues.
When should I choose a double servo feeder instead of this GCD servo feeder?Choose the double servo feeder when the application is motor lamination stamping, thin silicon steel, wide material, long feeding pitch, one-feed-one-pull feeding or a wide-bed high-speed press with strict die timing. For more general high-speed stamping, GCD is usually the cleaner starting point.
Can the GCD feeder work with a leveler or decoiler?Yes. In high-speed press lines, the feeder is usually combined with a decoiler and a leveler or straightener so the strip is released, leveled and fed into the press in a stable sequence. The exact layout depends on coil weight, material thickness, loop space and press speed.
Is a high speed servo feeder the same as a high speed air feed?No. A high speed air feed is normally a pneumatic feeding device for specific short-pitch press work. The GCD is a servo roll feeder, so it is selected when programmable pitch control, roller grip and press-signal synchronization are more important than a simple pneumatic feed stroke.
Can Henli quote this feeder with inch-based production data?Yes. Send strip width, thickness, feeding pitch and layout dimensions in either metric or imperial units. Henli can convert the quotation data, but final feeder selection still depends on the actual material, die timing, press speed and release requirement.
When should I review the micro high speed servo feeder instead?Review the micro high speed servo feeder when the line uses narrower strip, compact tooling or small-pitch high-speed stamping where a smaller feeder structure may be more suitable.
What information is needed for an accurate quotation?Please provide material type, thickness, width, coil weight, coil ID/OD, feeding pitch, press model, strokes per minute, die release angle, layout drawing and any automation requirements. These data decide the feeder model and line configuration.
ย
Related Products
Explore complementary Henli equipment for complete coil handling, feeding, leveling, and lubrication workflows.
