2.Outgoing catenary to assist and support the material
3.Hold down arms device
4.Feeding line easily adjusts by advance worm gear screw jacks device
5.Leveling setting wheel with meter panel
6.The uncoiler contain the butterfly brakes air compressor
8.Feed and staightener rolls with a hard chrome finished
Width of Material (mm)
Thickness of Material (mm)
Max.Coil Weight (kg)
Coil I.D. (mm)
Max.Coil O.D. (mm)
Feeding Accuracy (mm)
3 Up / Down 4
Feeding Level (mm)
According to Customer’s Requirements
Power Supper (V)
380V 3-Phrase 380V
Air Supply (kg/cm²)
Servo Motor (kw)
Decoiling Motor (kw)
Machine Size (m)
Machine Weight (kg)
Openable Straightening Head
the whole part of the upper straightening part is openable,which is convenient for cleaning the surface of the work rollers,such as oil stain,waste scrape,non-ferrous metal oxide layer,etc.
Automatically Adjusting Correction
Adjust the correction amount by geared motor/servo motor,the memory can store 99 sets of numerical parameters,can be called at anytime.
It is used to smoothly transfer the coil to the spindle of coil shaft.It is used to lift the stripend so that the sheet can smoothly enter the leveling machine.Coil car is provided with a material roll anti-dumping baffle.It can effectively prevent the roll from falling over when the metal coil is narrow.
material head and tail deformation is large,can not be corrected used to cut the material head,tail.
Automatic Double-sided Oiler
automatic oiling of the upper and lower surfaces of the material.
Uncoiling spindle support arm
driven by hydraulic cylinder, the support arm supports the end of the uncoiling spindle after loading, thereby balancing the gravity of the main bearing, improving the stability of the uncoiling, and increasing the service life of the spindle.