Auto Parts Stamping LineHENLI2019-07-25T15:12:40+08:00
1/ Stamping Parts that produced with our coil feeding equipment
2/ Description about our coil feeding equipment
In the automotive manufacturing industry, higher quality, greater capacity and lower cost demand have made automobile manufacturers feel unprecedented pressure. Traditional manual production methods are gradually retiring, and automated production has sufficient future for development. The choice of the size of the production line depends on what kind of stampings need to be produced. For the major auto manufacturers that mainly produce auto parts, stamping parts, automotive interior panels, brake pads, car seat pendants, etc., they are constantly introducing automated production lines to improve production efficiency.
In order to meet customers’ requirements for higher quality, greater capacity and lower cost, Dongguan Henli Machinery Equipment Co., Ltd. continues to improve, research and development, and produce the 3 in 1 compact servo feeder integrated decoiling, leveling and feeding.
The 3 in 1 feeder is divided into three types: standard, medium plate and thick plate, which are distinguished according to the thickness of the applicable material:
The standard 3 in 1 feeder is suitable for the automatic production of sheet materials with a thickness of 0.3-3.2mm. It is mainly used in the field of home appliances, mobile phone backboards, computers, monitors, printers, motor stators, air conditioners, set-top boxes, and other fine stamping.
The medium plate type 3 in 1 feeder is suitable for the automatic production of 0.5-4.5mm thick medium plate materials, and is mainly used for medium plate stamping of electrical parts, auto parts, metal metal products, stamping processing, etc.
The thick plate 3 in 1 feeder is suitable for the automatic production of thick plate materials of 0.6-6.0mm thick, and is mainly used for stamping of thick plate materials such as shelf punching, brake pad stamping, caster metal stamping, safe.
The high-strength 3 in 1 feeder is a new 3 in 1 servo leveling feeder specially developed for the stamping production of medium and thin sheets with high yield strength; the clamping roller surface is plated hard. The chrome treatment increases the friction between the roller and the belt to ensure that the feeding accuracy is not affected by the slip during the feeding process.