Project Description
- Model: NCHL-600B
- Servo Motor: 2.9 Kw
- Net Weight: 4550 Kg
- Height: 2200 mm
- Width: 1820 mm
- Length: 3880 mm
- Air Pressure: 5 kgf/cm²
- Sheet Thickness Max.: 0.3-3.2 mm
- Feeding Width Max.: 50-600 mm
- Coil I.D. Max.: D. 450-530 mm
- Coil O.D. Max.: 1500 mm
Applicable Material
Material:Cold rolled sheet, hot rolled sheet, pickled sheet, galvanized sheet, stainless steel sheet, copper, aluminum
Material Thickness：0.3 ～ 3.2 mm Note: Please refer to the correction ability table for thickness x width.
Material Width：100 ～ 1800 mm
Yield Strength ：≤245 N/mm2
Coil Inner Diameter:Φ450~φ530mm/φ480~φ530mm/φ580~φ630mm
Coil Outside Diameter:max φ 1600 mm
Coil Weight:3000~15000kg
Product Features
Standard accessory:
1.Electric eye loop control system
2.Outgoing catenary to assist and support the material
3.Hold down arms device
4.Feeding line easily adjusts by advance worm gear screw jacks device
5.Leveling setting wheel with meter panel
6.The uncoiler contain the butterfly brakes air compressor
7.Uncoiler-inverter device
8.Feed and staightener rolls with a hard chrome finished
Model Specifications
| Model | NCHL- 300B |
NCHL- 400B |
NCHL- 500B |
NCHL- 600B |
NCHL- 700B |
NCHL- 800B |
NCHL- 1000B |
NCHL- 1300B |
NCHL- 1600B |
|---|---|---|---|---|---|---|---|---|---|
| Width of Material (mm) | 50-300 | 50-400 | 50-500 | 50-600 | 80-700 | 80-800 | 80-1000 | 100-1300 | 100-1600 |
| Thickness of Material (mm) | 0.3-3.2 | ||||||||
| Max.Coil Weight (kg) | 3000 | 5000 | 6000/8000 | 8000/10000 | |||||
| Coil I.D. (mm) | 450-530 | 480-530 | |||||||
| Max.Coil O.D. (mm) | 1500 | ||||||||
| Max.Speed (m/min) | 16 | ||||||||
| Feeding Accuracy (mm) | ±0.1/100mm | ||||||||
| Work Rollers | 3 Up / Down 4 | ||||||||
| Feeding Level (mm) | According to Customer’s Requirements | ||||||||
| Power Supper (V) | 380V 3-Phrase 380V | ||||||||
| Air Supply (kg/cm²) | 5kg/cm² | ||||||||
| Uncoil Expansion | Hydraulic Expansion | ||||||||
| Servo Motor (kw) | 1.8 | 2.9 | 4.4 | 5.5 | 7.5 | ||||
| Decoiling Motor (kw) | 2.2 | 4 | |||||||
| Machine Size (m) | 3.88×1.52 ×2.2 |
3.88×1.62 ×2.2 |
3.88×1.72 ×2.2 |
3.88×1.82 ×2.2 |
3.88×1.92 ×2.2 |
3.88×2.02 ×2.2 |
3.88×2.22 ×2.2 |
3.88×2.52 ×2.2 |
3.88×2.82 ×2.2 |
| Machine Weight (kg) | 2870 | 3440 | 4130 | 4550 | 5000 | 5500 | 6000 | 7300 | 8600 |
Optional Function
Openable Straightening Head
the whole part of the upper straightening part is openable,which is convenient for cleaning the surface of the work rollers,such as oil stain,waste scrape,non-ferrous metal oxide layer,etc.
Automatically Adjusting Correction
Adjust the correction amount by geared motor/servo motor,the memory can store 99 sets of numerical parameters,can be called at anytime.
Coil Car
It is used to smoothly transfer the coil to the spindle of coil shaft.It is used to lift the stripend so that the sheet can smoothly enter the leveling machine.Coil car is provided with a material roll anti-dumping baffle.It can effectively prevent the roll from falling over when the metal coil is narrow.
Shearing Machine
material head and tail deformation is large,can not be corrected used to cut the material head,tail.
Automatic Double-sided Oiler
automatic oiling of the upper and lower surfaces of the material.
Uncoiling spindle support arm
driven by hydraulic cylinder, the support arm supports the end of the uncoiling spindle after loading, thereby balancing the gravity of the main bearing, improving the stability of the uncoiling, and increasing the service life of the spindle.
Photo Galley
Application
