STC-110 | Left-front
STC-110 | Right-front
STC-110 | Right-front
Advantages of Henli Press Machine
- Slider guide adopts “high-frequency quenching” and “rail grinding process”; high-frequency quenching: hardness reaches above HRC 48 degrees, guide rail grinding process: surface finish can reach mirror degree Ra0.4, plane height reaches 0.03mm/m*m.
- Advantages: low wear, high precision, long precision keeping time and long life. Gear shaft is made of high-strength alloy material 42CrMo, all tooth surfaces are treated with medium frequency, high hardness; tooth surface grinding processing, high precision.
- Advantages: small tooth surface wear, high precision of tooth surface engagement and long service life. Ball seat material: sintered TM-3 copper alloy ball seat, the general manufacturer ball seat is ductile iron.
- Advantages: High-strength TM-3 copper alloy ball seat, the surface pressure strength is up to 100kgf/cm*cm. During the pressing process, the ball seat and the serrated tooth ball head greatly reduce the chance of jam and prolong the service life. All the copper sleeves of the QIAOSEN press are made of tin phosphor bronze ZQSn10-1, and the general manufacturer uses BC6 (Sen 6-6-3) copper.
- Advantages: The strength is 1.5 times higher than that of ordinary BC6 copper, the strength is high, the wear is small, and the precision is kept for a long time. Where the collar is in contact with the oil seal, the surface of the collar is ground and the surface is chrome-plated.
- Advantages: the surface finish reaches between Ra0.4 and Ra0.8, it is not easy to leak oil when it comes into contact with the oil seal, and the surface is chrome-plated. The hardness is up to HRC of 48 degrees or more, ensuring long-term use without wear and longer service life of the oil seal. The crankshaft is made of high-strength alloy material 42CrMo, and the general manufacturer’s crankshaft is made of 45 steel material.
- Advantages: The strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking the crankshaft is greatly reduced. The standard of QIAOSEN crankshaft is produced by professional crankshaft manufacturers(after strict forging, heat treatment, flaw detection, processing, inspection and other perfect processes) to ensure that various quality problems of the crankshaft during the production process are avoided and the quality of the crankshaft is ensured. Wheel static balance test platform, each flywheel is static balance test to ensure that the flywheel reduces the shaking of the press when it is running at high speed. All of QIAOSEN’s open single-point and double-type double-point crank presses, standard oil pressure lubrication pipes are used in diameter 6(other manufacturers generally use diameter 4),the oil pressure lubrication piping of medium and large punch adopts all diameter 8.
- Advantages: the pipeline is long, the large passage diameter is not easy to block and rupture, ensuring the safety of the lubricating oil road. In order to ensure that the accuracy can reach the Japanese JIS1 standard, eliminate machining errors, and accumulate errors in assembly, we have specially designed a grinding machine for grinding and repeated grinding to ensure that the precision meets the JIS1 standard, and some local precision even reaches JIS premium standard.
|Slider Stroke Length||mm||110||180||130||220|
|Slider Strokes Per Minute||s.p.m||50-100||35-65||40-85||30-55|
|Impact Force Location||mm||3||5||3||6|
|Maximum Mode Height||mm||435||400||485||450|
|Slider Adjustment Amount||mm||100||100||100||100|
|Up Platform Area||mm||1400×500×70||1400×500×70||160×550×70||160×550×70|
|Down Platform Area||mm||1800×650×130||1800×650×130||2000×760×150||2000×760×150|
|Main Motor Power||Kw × P||11×4||11×4||15×4||15×4|
|Platform To Floor Distance||mm||830||830||990||990|
|Punch Accuracy Grade||–||JIS 1||JIS 1||JIS 1||JIS 1|
- The high-strength fuselage structure has small deformation and high precision.
- OMPI pneumatic dry cluch brakes are used.
- The slider adopts two-corner and six -sided guides,and the slider guide adopts “high-frequency quenching” ten “rail grinding process”.small wear,high precision,long precision maintenance time and improve die life.
- The crankshaft is made of high-strength alloy 42 CrMo,which is 1.3 times stronger than 45 steel and has a longer service life.
- The copper sleeve is made of tin phosphor bronze ZQSn10-1,which is 1.5 times stronger than ordinary BC6 brass.
- The highly sensitive hydraulic overload protection device protects the life of the press and die.
- Standard SMC pressure regulator,oil mister,air filter.
- Optional mat(air cushion).
Configurations of Henli Press Machine
- QS operrating system
- Electronic crankshaft angle indicator
- Double-cylinder independent oil-pressured overload device
- Digital height indicator
- Improved electrodynamic butter lubricating device
- Electronic can device
- Air blowing device 1/2″ primary circuit
- Air source contact 1/2″ secondary circuit
- Miss inspection device
- Power socket
- Mechanical quakeproof foot
- Mis-delivery detection device reserved interface
- Maintenance tools and tool cabinet
- Main motor inversion set
- Photoelectricity safety protection device
- Imported oil-gathering silencer
- Second failing protector
- Slider and mold balancing device
- Vapor-pressure die backer device
- Cam top material device
- Foot switch
- Safety dog and safety bolt
- Quick exchange of die device
- Automatic feeding device
- Flattener(bump-cutter machine)